Site Plans

• Sketch Plans/Feasibility Studies
• Zoning Approval Assistance
• Engineering Surveys
• Land Development Plans
• Site Layout Plan and Building Placement
• Vehicular Circulation
• Grading Plans
• Storm Water Plans
• Sediment/Erosion Control Plans

Environmental Services

• Wetlands Consulting/Delineation/Permitting
• Best Management Practices (BMP)
• Erosion and Sediment Pollution Control Planning
• Watershed Management and Improvement
• Floodplain Delineation
• Grant Assistance

Comprehensive Nutrient Management Plans (CNMP)

• Site Investigation
• Inventory and Evaluation Reports

Manure Management Facilities and Best Management Practices

• Design Plans in Accordance with NRCS Standards
• DEP Water Quality Management Permits
• Construction Inspections and Post-Construction Certifications
• Certification of Existing Manure Storage Facilities
• Grant Assistance and PennVest Applications
• Structural Design for Roof Structures, Retaining Walls, Concrete Tanks
• Dairy Facilities Planning
• Alternative/Advanced Manure Management

Water Resources

• NPDES Permitting
• Storm Water Management Plans
• Storm Water Collection and Conveyance
• Culvert Design
• Floodplain Delineation/Analysis/Modification
• Permitting for Structures and Encroachments
• Stream Restoration and Buffer Projects

Randall Hoover, PE

Senior Engineer

Randy joined TeamAg in 2002. He received a Bachelor of Science in Civil Engineering and Appropriate Technology from Drexel University. Randy became a PA Professional Engineer in 1999 and is also licensed in MD, VA, DE, and WV.

As Senior Engineer, Randy helps oversee the engineering services for TeamAg. Randy is a member of the American Society of Civil Engineers, National Society of Professional Engineers, and is a registered Technical Service Provider.

Sonny Albright, EIT

Design Engineer

Sonny joined TeamAg in 2021. He received a Bachelor of Science in Civil Engineering from Penn State University in 2019 and is working towards becoming a PA Licensed Professional Engineer.

As a design engineer, Sonny supports land development projects by producing plans and reports for stormwater management and erosion and sediment pollution control. He also serves as an engineering technician through surveying, infiltration testing, and quality assurance inspections.

Jeff Giger, PE

Engineer

Jeff received a Bachelor’s degree in Structural Design and Construction Engineering from Penn State in 1992 and has 25 years of experience working in structural engineering. He is experienced with timber, concrete and steel structures in agricultural, industrial, residential and government.

Mark Groshek

Engineering Technician

Mark joined TeamAg in March of 2020 and is retired from USDA-NRCS after 37 years of service. He has served in several Field Offices throughout Pennsylvania and for the past 20 years has served as the Area Engineering Technician in the Bloomsburg Technical Office providing technical assistance to 22 Counties in Northeast PA. He has a wide range of experience in planning, survey, design and installation of the many best management practices used in agricultural operations.

Mark resides in Columbia County with his wife of 33 years, has two grown sons and two grandchildren.

Andrew Haralam

Engineering Technician

With a B.A. in Accounting, Masters-level course work in Earth Science, and field work experience with Enviroscan Inc. and Lancaster Farm Fresh Co-op, Andrew utilizes his former training to collect farm-level data through surveys, infiltration testing, and quality assurance inspections.

His passions converge at the nexus of equitable food systems, human health (mental and physical), and environmental protection and conservation. Additionally, Andrew is supporting the development of regenerative agriculture services at TeamAg.

Andy Hibbs, PE

Engineer

Andy is a professional engineer who has been employed by TeamAg since September 2013.  His duties include the planning, design, and construction oversight of agricultural waste management systems.  He previously worked 20 years for the Union County Conservation District as the Regional Conservation District Engineer, performing similar duties.  He obtained his professional engineer’s license in Pennsylvania in 2006 and is also licensed in Maryland.   Andy was raised on a family beef farm in central Pennsylvania and has always had a passion for agriculture.  He has worked on neighbors’ dairy farms, assisting with the milking, feeding, and crop production.  His work experiences also include logging, road construction, and surveying.  He holds a degree in Surveying Technology and a Bachelor of Science in Engineering, both from Penn State.  He and his wife are raising two children and enjoy watching them grow in knowledge, wisdom, and stature.

Keith Hodge, PE

Engineer

Keith started as an intern with TeamAg in the summer of 2008, then joined TeamAg full time in 2009 after graduating from Penn State University with B.S. degrees in Agricultural and Biological Engineering and Mechanical Engineering. He took a hiatus to obtain a Master of Science in Environmental Engineering from NC State University and then returned to TeamAg in 2015. Keith was initially registered as a Professional Engineer in 2014 and maintains licensure in Pennsylvania, Maryland, and Connecticut.

Keith is a project manager and engineer with a focus on site planning, manure management facilities, and alternative manure management.

Mark Myers, PE

Project Engineer

Mark began working with TeamAg in 2012. He received his B.S. in Agricultural Engineering, Pennsylvania State University in 1983 and is a PA Licensed Professional Engineer in Civil Engineering since 1990.  In 2007 he became a Certified Professional in Erosion and Sediment Control, and in 2008 a Certified Professional in Storm Water Quality.

Mark serves a project engineer with considerable experience in site design, construction inspection, stormwater management and permitting on various land development projects.

Cameron Renehan, PE

Engineer

Cameron joined TeamAg in 2012. He received a Bachelor of Science in Biological Engineering with a minor in Environmental Engineering from Penn State University. Cameron became a PA Professional Engineer in 2017.

As a Project Manager, Cameron is responsible for overseeing various land development projects and technical design, including stormwater management and erosion and sediment pollution control plans, and coordination of state and county permitting.

Terence (Abe) Repine, PE

Engineer

Abe received a Bachelor of Science and Masters of Science in Agricultural Engineering from Penn State University and is a PA Professional Engineer. He is retired from positions with Soil Conservation Service and Natural Resources Conservation Service.

He lives on a beef farm in Centre County and serves as a quality control inspector in northern and western PA for TeamAg.

Eric Sauder, EIT

Engineering Technician

Eric joined TeamAg in 2016. He received a Bachelor of Science in Mechanical Engineering and Masters in Architectural Engineering from Penn State University. As engineering technician, Eric is often in the field completing surveys and inspections.

Additionally, Eric utilizes his experience in sustainability to develop support for regenerative agriculture and agricultural ecosystem services, like soil carbon sequestration, at TeamAg.

Rob Sweppenheiser, PE

Engineer

Rob joined TeamAg in 2021.  He received a Bachelor of Science in Agricultural Engineering from Penn State in 1987.  Rob became a Professional Engineer in 1994.  He worked as District Engineer for Bradford County Conservation District for 33 years. 

Rob resides in Bradford County with his wife and has a grown daughter who is a large animal vet.

Jeremy Weaver

Project Manager

Jeremy joined TeamAg in 2007. He received his Bachelor of Arts in Regional Planning from Indiana University of Pennsylvania in 1998. Prior to joining TeamAg, Jeremy worked for the Lancaster County Conservation District (2001-2004) and with The USDA-NRCS (2004-2007) in the Lancaster Field Office. Jeremy’s Professional influences include former NRCS State PE Hosea Latshaw, current NRCS PE Eric Ashley, NRCS Civil Engineering Technician Gary Ballina and current LCCD Engineering Specialist Jim Saltsman.

As a Project Manager, Jeremy works closely with clients, TeamAg staff, contractors, Municipal representatives, Private Partners as well as State and Federal Agencies to successfully and efficiently complete Ag conservation BMP projects. Jeremy is Vice-Chairman of his Townships Planning Commission

John Williamson

Business Development

John has been with TeamAg since 2002. After receiving a BSCE from the Ohio State University, he later received degrees from Cornell University: Masters Agricultural Engineering and Masters in Regional Planning.

He currently works with townships with their MS4 challenges seeking solutions from the agricultural community, as well as developing other business opportunities for TeamAg.

John Zaginaylo, III, PE

Engineer

John is a retired Engineer with 35 years of experience with USDA-NRCS providing technical support for planning, design, and construction quality assurance. John is located in Northeastern Pennsylvania to better serve clients in northern PA and lower NY.

John operates a dairy farm with 80 cows and 250 acres of crop land with his daughter, Rosalie and wife, Laune where he has installed many of the conservation practices and programs that TeamAg services and promotes.